Sizes corner kitchen sinks

The corner sink has not yet become familiar to our hostesses, although it is such a sink that makes it possible to arrange space in the corner kitchen units. Most often, the name “corner” more means the location and the need for arranging the cabinet under the sink, especially the water supply and communications. However, if you decide that you need a corner sink, then her choice is better to do after you have decided on the design of the kitchen. Their forms and variations are so diverse that sometimes they seem to be works of art and engineering thought.

Corner sink has a number of advantages. Such models can seriously save space, make functional storage areas under the pedestal and in the hinged corner of the headset. They allow you to unusually design a working area, adapting to the needs of the hostess, to become an additional surface. Such solutions are considered the best for small-sized kitchens.

However, the choice of the sink - a responsible matter. The mistake will cause serious inconvenience for the hostess and the whole family. The place in the corner behind the crane becomes less functional and inconvenient for miniature women: it is difficult for them to get this area. It will be inconvenient for those who are used to cooking with four hands: it will be problematic for both of them to stand next to the sink.

Corner models are more expensive, and it can be difficult to install them due to the transfer of water supply. Therefore, you should pay attention to unusual designs with several bowls, decide how often and why you use the sink, whether you need additional accessories.

Corner sinks can be significantly different in the way of installation, so you need to decide on this in advance, even when shaping the design of the future kitchen, so as not to disturb the beauty and integrity of the interior. Now available overhead, mortise, sub-table and integrated sinks.

Overhead car wash - one of the most simple in form and design, budget options. Such a sink is “superimposed” on top of a special furniture pedestal, there are special mounting rims that allow the sink to “sit down” tightly, not to slide off and not to warp.

Mortise models became very popular due to the possibility organically fit a variety of options in the domestic space. Here the sink cuts into the countertop, so there are certain requirements for the coincidence of the dimensions and weight of the sanitary ware.

Integrated sinks - a luxury option when washing and tabletop single web of the same material without joints and gaps. They are made to order from composite material and natural stone. Such models are quite expensive and spectacular.

Under table options appeared not so long ago they are distinguished by a special supporting structure under the table top.

Now manufacturers offer a wide selection of plumbing for every taste. Due to the specifics of the place and special requirements (the sink should wash well, withstand high temperatures, be durable) such materials became the most demanded:

• Stainless steel - traditional and budget option.She has proven herself in the kitchen, meets all the requirements. The glossy glossy surface requires special care: it must be wiped dry, so that there are no stains and stains, and more expensive matte options are obtained due to the special rolling, they look very impressive. The disadvantages of steel include a lot of noise, and cheap thin stainless steel models can bend and fail. To be sure of the quality and strength, look for the sign of GOST 50851−96.

• Fake diamond They are made of polymeric materials and fillers (for example, quartz, granite, fiberglass), they can be given different shades and shapes, they are unpretentious in maintenance, they are very durable, resistant to shocks, chemistry and high temperature, they quench the noise. Many manufacturers come up with their own compositions and actively advertise them (granite, silicryl, corian, silgranit, fragranit), such car washes are quite expensive, but they can be safely called unique and almost eternal.

• A natural stone (granite, marble) - expensive and effective material. It is used only for luxury individual projects. In ordinary life, it is difficult to work with them because of the impressive mass of products.

Still washing made from ceramics (eg, porcelain), enameled steel. They are prone to chipping, so they are not so practical in the kitchen, although they meet the other requirements. In expensive interiors, you can find shells made of such beautiful and unusual materials like wood, glass, pumice.

Sinks vary in size, shape, bowl depth and configuration. In the amount of corner sinks, it is important that they can be mounted in your headset without disturbing the functionality. The width of the table of the headset will play here, because for convenience, you need an indent of 5 cm from the edge of the working surface to the sides of the sink, then splashing will be less. The sink sinked into the furniture will be aesthetic and comfortable, so that the hostess can simply reach the far corner and wipe it.

Although the shape of the bowl can be any (oval, triangular, rectangular, square, trapezoidal), rectangular and square models turned out to be more practical - they can be used to wash different dishes, it holds much more and is suitable for simultaneous work with products and dishes.

Great importance is given to the depth of washing. Small options (15-17 cm) are good for a kitchen equipped with a dishwasher. Where there is no such unit, a depth of 16-22 cm is more suitable.

The configuration in the corner implies the number of bowls, wings, their position relative to each other. Multi-level options solve several problems at once (defrosting products, washing plates, drying dishes, storing accessories). Such bowls can be up to 5, usually choose models with two bowls (for food and dishes), each container can have its own drain. Look for sinks with wings - a relatively shallow grooved surface for drying dishes - they are popular and practical.

In the kitchen, all the little things play a special role, and the sink has its own accessories. Eminent manufacturers offer not only plumbing for their sinks, but also other gadgets (dispensers for detergents, stand for sponges and rags, grinders, nets, colanders, cutting boards, etc.). They can be bought separately or purchased in the kit.Plus in ergonomics and elegant design (they ideally complement each other).

If you buy such things separately, you must first clarify whether your sink is combined with such gadgets (for example, a shredder — a dispenser — and the drain valve can be installed not on all models). Accessories allow you to get rid of some of the problems that are inevitable in the kitchen. The ergonomics of such a purchase are in perfect “coincidence” of sizes and thoughtful storage. So, cutting boards, nets for washing fruits and colanders (collanders) are easily attached to the sides, do not slide off, freeing hands and heads from the hassle.

If you have already purchased a corner sink made of chipboard and have the skills to work with a jigsaw, you can cope with the installation on your own:

• Decide where and how the plumbing will be located;
• Use a pencil to mark the borders of the sink on the countertop (use the template from the kit or make it yourself. Remember that the width of the rim is not taken into account, otherwise the sink will fall inward);
• Make a hole in a diameter of 1 cm in the table top, stepping back inside the intended contour;
• Use the slot for the jigsaw blade;
• Use the tool to repeat the contour and create a place under the sink;
• Process the edges of the cut with a compactor so that the bowl is firmly and evenly planted;
• Drown the sink in the countertop and slightly tighten the fasteners;
• Walk through the silicone sealant at the interface;
• Perform diagonal fastener adjustment to the end;
• Cut off excess adhesive sealant.

To perform this work, you can invite the installer. When buying in the manufacturer’s salon, this service will be justified: the work will be done quickly and efficiently.

In a small kitchen, every centimeter is important, so when deciding to install a sink in the corner, it is worth considering all the details. It will help in this and an independent drawing, and planners services that are offered in many specialized stores. This will allow you to easily assemble the kitchen from standard modules, make the corner kitchen cabinet really useful and help you decide on the desired configuration of the sink. Therefore, be sure to design your kitchen before purchasing each individual item and refer to this drawing in the selection process of the corner sink.

A separate issue of the installation of the angular model can be considered the illumination.Most of the time, this part of the kitchen turns out to be very dark, which can cause tired eyes and a headache. The backlight (special waterproof spots or diode tape), which will be quite economical, helps to solve this problem. However, think about the scenarios of light and its wiring will have to be in advance.

Pay attention to the ergonomics of the space, so that the hostess can work easily and comfortably, and the area behind the tap can be used to store accessories, was available for cleaning. It depends on the width of the table top and the height of the chef. The type of sink depends on the choice of headset (you get a separate cabinet under the wall washer or you will cut it into the countertop).

Is there a connection between design and washing? It is believed that in classical styles with an abundance of natural materials it is more appropriate to use stainless steel, artificial and ceramic materials for the sink. But in modern, high-tech, urban styles, full of modern, multifunctional and practical solutions with color furniture minimalism and contrast of textures it is more advantageous to choose interestingdesigns of stainless steel sinks and ceramic granite compositions (again, artificial stone). If you find it difficult to decide on the color of the bowl, then the designers recommend light shades that are appropriate in pastel kitchens and give a beautiful contrast in dark interiors.

Although there are universal and almost standard corner sinks, you still need to choose this kitchen element biasedly. The sink sets the working mood, harmonizes the space, so there are no trifles in it. Choose the one that makes your heart sing and inspire accomplishment and culinary experiments!