Subtleties of painting walls with water-based paint

Repair of the room takes a lot of time, because you need to pay attention to every detail. Such work consists of different stages, each of which plays its own role. One of them is the decoration of the walls, and for this you need to find quality material with which you can achieve the desired effect, make the room presentable and beautiful.

There is a wide range of products on the market for indoor surface decoration; each of the options has its own characteristics, characteristics and advantages.

For a start, it is important to choose the material that will be used for the walls in the room. The application process depends on this, as well as the effect that results. Such work is responsible and serious, therefore it is necessary to approach it from the right side. In residential areas, water-based paint is mainly used, which is designed for walls. Widely demanded material with polyvinyl acetate compounds, which has a lot of advantages. It fits perfectly on the plaster in the apartment, as well as on natural wood and plaster.

The advantages can be ranked no sharp and unpleasant odor, no solvents. The material perfectly binds to the surface to be treated, it can be diluted with water, as a result an elastic coating is formed on the walls.

For walls - this is one of the best options as a finish. The material has an improved ability to create a presentable appearance for a long time.The composition includes latex, thickener, filler and antiseptic, which together creates a unique mixture to cover the walls in the home and in another room. Before you open several types of products, among which there are silicone, mineral, silicate and acrylic coatings. Each of these options has its own performance characteristics and creates a special effect when finishing.

It is necessary to stock up with everything you need before starting work, so as not to be distracted by extraneous things. If you decide to do the painting yourself, prepare everything in advance, then you can proceed to the task. For mixing the material will need a construction mixer, but you can do with a special nozzle.

The easiest way to paint the walls with a roller, and for this you need to have at hand a tray where you will pour the composition.

Before you begin to apply water-based paint, it must be thoroughly mixed,achieving mass uniformity. If the instructions say that water is required for dilution, you should follow the recommendations. Before painting the wall, apply paint on a small piece of cardboard and wait until the surface is dry to see the result. This will help to avoid mistakes, as well as to achieve the effect that you originally wanted.

This is the next stage after the necessary tools and materials have been collected. Often the walls are uneven, so you have to solve this problem. Before that, you need to cover the rest of the surface with a protective film so as not to get dirty.

The walls will need to be cleaned from the old finish, if it has a place to be. Decorative coating is removed with spatulas, hard brushes and sponges, it all depends on what material was used previously. If there is whitewash, it is easy to wash it off with water and a rag. But after that you have to wait for the surface to dry completely, then you can proceed to the next stage.If you do everything right, the duration of the work will be reduced, and the result will be of high quality.

To remove bumps or hide other defects, you will need a primer that can seal problem areas. If you do not cope with the flaws in advance, after painting they will be better visible, therefore, they will spoil the general appearance of the room, after which they will have to redo everything. To avoid re-work, it is recommended to do everything right the first time.

The aqueous emulsion paintwork is produced in a thick consistency, which means that it must be prepared before use. For a perfectly even paint, the material needs to be thinned. To do this, use simple water, which is added to the container with the composition, then everything is thoroughly mixed. A previously prepared mixer will help to cope with this task; if it is not available, you can do with a long stick.

But if you want to achieve a special texture on the surface of the walls, then perhaps you don’t need to paint. Textured patterns require a thick consistency.

It is not necessary to immediately use the paint after dilution, it retains its properties for a long time. Before painting you need to re-mix the composition, then you can apply it to the surface. Once you have achieved the desired consistency, decide on the shade of the walls, which will fit the overall interior. The market is represented by white water-based paint, in which the appropriate color of the color is added. Depending on its quantity, any shade is created.

It is important to correctly calculate paint consumption. This is one of the most important indicators, which is calculated in kilograms per square meter. This characteristic of products is often indicated on the label itself, which is applied by the manufacturer. Since we are talking about water-based paint, the figure is averaged. Actual material consumption depends on several factors. Much depends on whether you want to dilute the material or not.

The important point is to create the optimum temperature for painting, which should not exceed twenty-five degrees Celsius. The composition is applied with a thin layer, it is better to perform the procedure several times.Between this is a break for a few hours.

Thanks to water-based paint, you can create any lining effect, which differs not only in structure, but even in shape. At the same time, the cost of the material is available, therefore, often the consumer chooses such an option of finishing. You will need to mix the paint, fill it with capacity for further work. The choice of application tools depends on the effect you want to achieve. You can use a wide brush that sinks into the paint. Make sure that the composition does not flow, get rid of excess.

It is recommended to start painting the walls from above, to make short vertical and horizontal strokes. Each square meter is processed, it must be remembered that the new area should cover the previous one, and this should be done while the edge is still quite wet.Paint is applied consistently, it is recommended to process one wall completely before taking a break, so that the change in tone is not noticeable. The composition dries quickly, and before applying the next layer it is enough to wait about two and a half hours to continue work.

Coloring the old wall begins with surface treatment. You will need to remove grease stains, with which the soap solution will help to cope.

The roller can be used if you want to quickly treat the surface. In this case, you will need to make several layers, unlike a brush, since the tool subtly paints. The roller should be carried out in different directions along the wall, it is necessary to press evenly. Here it is important to observe accuracy, as the composition can be sprayed.

Qualified professionals use other tools. Paint can be applied with a spray gun, which has its own characteristics and advantages. Technology plays an important role, but thanks to this tool you can not only paint the walls of drywall, and get rid of divorce.The use of the spray gun will significantly speed up the workflow, reduce material consumption, and allow you to achieve high quality cladding. But it is important to find a quality device, so seek professional advice.

The use of water-based paint can solve any problem with lining. Thanks to this material it is possible to create the desired effect in the interior, to achieve a structure that looks original. If you are interested in ideas, or you already have your own ideas, it is important to know the details of applying paint in order to get what you want.

If you just want to repaint the walls in a different color, add a color of the corresponding shade in the quantity that is needed, and carry out the preparatory work, then take up lining.

Designer finish includes a careful selection of not only colors, but also wall textures. If we are talking about plasterboard products, this will not cause problems, since the material is perfectly treatable. To create patterns on the surface, you must use templates and stencils previously prepared.You can combine different shades that look harmonious with each other. This option is often used to design children's rooms, as well as bedrooms, where you want to create a special atmosphere.

The living room is often done in colorful colors, but it all depends on the type of design that was chosen earlier. Pastel colors are very popular, and they look not only soothing, but gently and naturally. If you are interested in texture lining, you first use a primer and other materials with which you achieve the desired effect. And only after this, the surface is painted with a water-emulsion composition of the corresponding colors.

You have the opportunity to make high-quality but affordable repairs by choosing a water-based paint that meets the standards and qualities. Thanks to it, the desired effect is achieved, it is easy to care for such facing, and it remains presentable for many years.

How to paint the walls with water-based paint, see the next video.