Decorative paint for walls with sand effect: features of use

 Decorative paint for walls with sand effect: features of use

New interesting materials used for the walls, allow you to perform unusual decorative surface coatings. This decor can be applied using paint with sand, which creates an original and elegant interior indoors. This type of raw material is a combination of high-quality components of the plaster for interior and paintwork products.

Distinctive features

A mixture of decorative paint may contain:

  • sparkles;
  • quartz sand;
  • shells in a crushed state.

This composition of paint allows to produce unusual effects and responds to customer requests in interior design.

The structure of the heterogeneous consistency of the product creates a sense of a complex technology of work, made with particular difficulty in a fairly long time. After applying the paint on the surface, patterns appear, resembling sand dunes, giving mystery and magic.

Advantages and disadvantages

A dye with sand has several advantages:

  • Long service life. Walls painted with such paint can last up to 10 years, in contrast to wallpaper coatings that last up to 5 years;
  • Versatility. The use of decorative paint is possible in any room due to its composition (kitchen, bath, bedroom, living room);
  • Wear resistance. Do not undergo deformation under the influence of UV rays;
  • Special care is not required. Textured paint in its composition has anti-static components that do not allow to settle a large amount of dust. To eliminate strong pollution, it is enough to wash the wall with clean water;
  • The structure of the product contains special substances that prevent the formation of mold and fungus;
  • Environmentally friendly coating. Does not contain components harmful to human health (does not cause allergic reactions);
  • The structure of the paint consists of small particles that have their own protective shell. Thanks to this design, the mixing of particles does not occur. Thus the multicolor decor is carried out.

Like all finishing materials, a coloring product with sand has disadvantages:

  • High cost of production. Some varieties of such decoration are more expensive than ordinary coloring materials;
  • The surface is painted with paint only on a perfectly clean basecoat.

Species

To understand what is a decorative paint with the effect of sand, it is necessary to study its types:

  • Pearl. The paint contains special components that add shine and shine to the product. Quality products of this type are considered safe when used, because the composition does not contain harmful and dangerous elements. Pearl paint is more expensive than other varnishes of a varnishing product. This is due to the fact that manufacturers in the manufacture of paint use only natural ingredients (sea shell).
  • Matte. Matte coloring product does not sparkle, but gives a special special effect of surface roughness. Looks great in modern interiors.These variations with the addition of white sand look perfect in spacious rooms.
Pearl
Matte finish

Pearlescent and matte textured coatings have a good texture, so that when self-applied will not cause difficulties.

Such coatings can be chosen for every taste and color. There is the ability to mix different colors, allowing you to get an individual color of the surface. Also among the huge range there are unusual colors with splashes. The walls, which are covered with textured products, resemble Venetian plaster. Silver, bronze and gold colors imitate metal.

Manufacturers

Quite a few manufacturers produce quality products dyeing materials, with both meritorious and negative reviews.

Among the producers of high-quality finishing coatings for walls with sand special effect, Monaco and Mirage paints stand out. Textured dyeing products of the French manufacturer are available in a huge number of colors of pearl variations.

Many customers opt for highly resistant German Alpina wall paint.

What to choose?

To create beautiful patterns on the walls, feel free to choose pearl paints with sand to give a shimmering effect. With this decor you can achieve a special effect of velvet.

The choice of paint should be carried out only from trusted manufacturers who have positive customer opinions.

High-quality coloring products have less consumption, unlike questionable types of paints. When choosing a painting product on the walls, you should read the instructions, because some wall paints can be used to finish the ceiling.

Application technology

Before you start working with a dyeing product, you must prepare it and mix thoroughly. In some cases, the paint must be diluted with water.

In order not to upset the result obtained, it is necessary to follow consistent steps when applying a decorative decorative product with your hands:

  • preparation and leveling of the plaster layer;
  • applying a primer material of deep penetration in 2 layers. You can replace the primer with water-based paint, identical in color with textured material;
  • the initial layer of decorative paint is applied by roller.Method of application and manner depend on the desires of the owner and design ideas. In this case, the design of the coating is created;
  • The second coat of paint with sand is covered with a brush. On a dry surface, the walls are smoothed using special tools.

Tips

To the surface of the wall looked great and after applying the paint, you need to listen to the advice of experts.

  • Experts recommend priming the first layer with plaster on a plaster base, it dries quickly. At the final stage, it is better to use acrylic putty. Acrylic has excellent antibacterial properties;
  • To paint the walls with sandy materials, you need to use an ordinary wallpaper spatula, with which the finishing layer of the applied material is compacted;
  • You can create a special color shade with your own hands. You can mix any colors. It is important that the mixed colors are made by one manufacturer so that the composition and consistency do not differ;
  • The drying time of the coloring product is about one day. For the period of drying you need to make sure that there are no drafts.After one hundred percent drying of the lacquer material, it is possible to apply protective agents or to lacquer the surface.

Examples in the interior

Experts recommend: to determine the choice of coloring products, you need to familiarize yourself with the color solutions that are suitable for certain areas.

Living room

The living room looks great with walls of blue color. This option creates coziness and comfort. Mother of pearl in perfect harmony with the classical style, baroque and rococo. The use of bright flashy shades is recommended in living rooms designed for outdoor activities. Pearlescent shades of light shades can visually enlarge the room. In such a room, it is possible to paint only one side of the wall, or divide the territory into separate zones.

Kitchen

Erroneous opinion is the use of bright colors in the kitchen. After all, on such surfaces will be clearly visible pollution. Experts advise to paint the surface in shades of blue, which hides pollution and reduces appetite.

Bathroom

To choose a color palette for the bathroom must be responsible.Some shades may alter the skin color when viewed in a mirror (bright green). It is better to use delicate shades, such as white, which has a positive effect on human well-being.

You will learn about the technology of applying decorative paint with the effect of sand from the following video.

Comments
 Comment author

Kitchen

Wardrobe

Living room