Quick-drying floor paints: features of the choice of an emulsion without odor

Any repair does not do without use of paints and varnishes. The main disadvantage of most paints is a sharp smell, which wears away for a long time and badly affects the health of people in the room. That is why the best choice for interior work is odorless paint.

Choosing a suitable dye, you should pay attention to the quick-drying options that are very popular today. The cost of such products is higher, but its advantages are indisputable, because the repair time is significantly reduced. In addition, most of these paints are made on the basis of natural ingredients.

The demand for odorless paints is associated with a number of advantages that they have:

• modern products are distinguished by the absence of a peculiar odor;
• there are no toxic substances that cause allergies and adversely affect the body;
• during work do not need to use protective equipment;
• quick drying of the surface after painting allows you to complete the repair much earlier;

• paint is applied in a thin layer, which saves material without affecting the appearance;
• after staining on the outer layer, there is no gliding effect;
• Modern technologies that are used to produce odorless, quick-drying inks provide mixtures of resistance to sunlight;
• They can be used for painting floors in rooms with a high level of humidity;
• In almost all emulsion and enamel paints of this type there are antiseptic additives that prevent the formation of fungus and mold.

Choosing paint, it is worth pre-study range. Modern manufacturers offer a large selection of different products.Each type of material has both advantages and disadvantages.

• Oil based paints dry for a long time, which is not always suitable for customers. To reduce the drying time, experts recommend the use of a well-evaporating solvent.

• Acrylic paint resistant to high humidity, elastic and durable. It is made from natural acrylic resin. The binder here is water. When the water evaporates, the mixture hardens.

• Alkyd enamel made from natural resin. It is durable and resistant to fading. The quality of the product is very similar to acrylic enamel.

• Latex - the most expensive paint. Latex is a sap from a rubber plant. To make the paint more accessible to consumers, artificial substitutes are added to it that make the product cheaper. Due to the fact that the composition of latex paint has rubber, it smoothes minor irregularities and cracks present on the surface.

• Polyurethane paint different resistant color, resistant to fading. Such a composition can be painted concrete surfaces and even paving slabs.Wooden floor before applying it must be covered with a primer.

If the house is made of timber, and no other materials are used, it is recommended to use acrylic enamel for wood. This coating allows you to hide the flaws of the surface, and also provides high throughput. Due to the fact that air enters the wood, comfortable conditions will be maintained indoors.

Acrylic blends can also be used to finish imitation beams.

For children's rooms, experts recommend choosing acrylic paint, which is easily washed off.. She can paint the floor and walls, as well as create drawings using a stencil. However, before you buy this or that paint, carefully study the composition, in it there should be no harmful substances.

Acrylic and latex products can be used for bathrooms and kitchens. The main requirement is the presence of components in the composition that prevent the formation of fungus and mold.

For kitchens, it is recommended to choose easy-to-care mixtures, the spots of grease and dirt should be easily washed off from their surface.

The hallway and corridors are characterized by high traffic, the floors in these rooms are subject to frequent mechanical loads. In this case, it is best to choose abrasion resistant acrylo-latex mixtures.

The household premises of the house also should not be ignored. In these rooms, you can use inexpensive wood paints, such as vinyl. In the rooms where washing and drying of clothes take place, the same products can be used as for bathrooms.

How much the surface will dry after dyeing is affected by the chemical and physical properties of the mixture. If for some products drying is evaporation of volatile substances, then for the others it is oxidation or chemical reaction with oxygen. Each type of composition for high-quality and fast curing requires specific conditions.

The most suitable temperature for painting the floor is +20 degrees.. Also plays an important role and humidity of the room. If the room has an increased level of humidity, the oxidation process becomes more complicated, and water or solvent will evaporate more slowly.

To achieve the optimum level of humidity, it is necessary to make ventilation or use an air dryer.

Before painting the surface, it must be carefully prepared, because it depends on the strength of the layer and the quality of adhesion of the material to the floor or wall. Surface preparation consists of removing dust and dirt, old paint, grease staining and drying.

A huge range of products without odor, suitable for wood and other surfaces, allows you to please every buyer. Experts recommend to take into account all the characteristics of the paint when it is selected for certain areas.

If the selection of goods is limited only by floor covering, then It is necessary to choose paints designed for indoor use and with universal characteristics. After that, you need to decide on the material for which the paint will be applied. It is the chemical composition of the surface that affects its reaction with the mixture.For example, for a premise of boards and cement, choose compositions that can withstand high humidity and the influence of sunlight.

Moreover, the mixture must withstand extreme cold and high temperatures. If you ignore these requirements, later cracks will appear on the surface and the paint will begin to fall off.

Oil or wax paints do not get inside the wood, so they are not suitable for such surfaces.. In the areas where the knot will appear on the surface, some time later, resin will start to seep, resulting in stains on the floor.

Prevent this will help acrylic or polyurethane enamel on organic solvents. These mixtures are higher than oil, but their quality is much better. Dispersion acrylic enamels are resistant to increased loads and ultraviolet, so they can be used in places with high traffic.

Before painting the surface, you should pay attention to the preparation of the base. After all even the smallest defects will be visible after painting.

Remove from the surface a layer of old paint and apply the primer. It will not only ensure a good grip on the new paint,but also allow economical use of the mixture. Moreover, the primer protects the wood from the formation of fungus and the multiplication of pests.

If the paint is too thick, brush hairs may remain on the surface.that also adversely affect the appearance. Therefore, before starting work, it is necessary to shake the container with paint slightly and check if it has thickened.

In some cases it is necessary use special solvents that dilute the paint and make it more liquid. Choose the solvent that is listed in the technical manual for the mixture.. The final coat of paint should be applied only after you make sure that the previous layer has laid down smoothly.

Choosing paint, many at first pay attention to the cost of production. In an effort to save money, some buyers choose the cheapest products, but the quality of such products is usually not the best. It is more reasonable to stop the choice on the compositions of well-known manufacturers, who have already earned a lot of positive feedback.

For example, acrylic enamel 0.9 kg from the company "Lacra" is estimated at approximately 450 p.A water-dispersion mixture with a capacity of 1.5 liters costs about 850 r.

Often, buyers choose products for indoor odorless trademarks from the Tikkurila trademark, 0.9 kg of which costs 650 r.

Review of quick-drying floor paints in the next video.