Unis primer features

Priming compositions solve several problems at once: they simultaneously make the surface more even, improve the adhesion of the base and the material applied on top of it, which reduces the consumption of the same paint and makes it stronger.

Unis primer has a number of nuances that must be taken into account.

After priming such a mixture can be applied:

• cement mortar;
• gypsum mortar;
• varnish;

• paint;
• enamel;
• drying oil

On 1 square. m. will have to spend a minimum of 100 ml of the composition, with 10 liters of the mixture is processed on average from 60 to 70 square meters. m. There is also the option of 5 l containers, in both cases the universal primer should be stored no more than 1 year after purchase. After finishing a layer of soil will reliably protect the base not only from moisture, but also from a number of aggressive substances.

On the primer "Eunice" received only favorable reviews, because these mixtures, as noted by consumers, are easily diluted with water and can be applied without any problems. Any initial surface, which is permissible to finish such compositions, is much better in their qualities. It is possible to apply such means both inside and outside - treated surfaces will not crumble or crack. Facial finishing material will retain its properties for a longer period of time than when applied directly on the untreated substrate.

"Eunice" waterborne primer The base is formed by a polymer dispersion and special additives, primarily antiseptic and reduce the formation of foam. Soil penetrating deep into, is able to provide reliable retention of the finishing material on foam concrete, iron (steel), cinder concrete and limestone. They say about deep penetration because the liquid passes 0.2-1 cm deep into the surface.

"Concrete Active" - This is a product for a concrete base that can be applied to stone surfaces. Drying period is exactly 2 hours. The primer can be stored for six months, and it should be applied in the amount of 300 g per 1 sq. M. After processing, even such an unstable type of coatings as heavy structural plaster will remain stable on the surface.

Primer for interior work is not suitable for improving the properties of street surfaces of the facade and terrace. The base is required to degrease, remove organic pollution. There should not be shedding - the strength of the substrate is very important. An important advantage is that Cladding can be done shortly after application. Not only brushes are suitable for work, but also spray guns, rollers, spray systems.

Priming of dusty surfaces is unacceptable.. Porous substrates should always be covered with several layers, if necessary, the technology allows diluting “Eunice” soils with clean water. Any type of these priming mixtures is packaged in such a way that deformation is completely avoided under the conditions of transportation and storage.

A bucket with a capacity of 10 liters is enough to lubricate about 30 square meters. m. walls in one layer. Drying it when the air is heated to 19 degrees and a relative humidity of 60% is about 3 hours. Any mixture can not be used outside with a humidity of 76% and above.. It is possible to work all year round in heated rooms, the level of humidity does not matter.

So, the primer from the company Eunice shows itself from the best side for a long time. To use this material in preparation for the finishing of walls can be quite widely. If you follow the instructions, it will not disappoint consumers.

To learn how to ground the walls, learn from the following video.